EUBA

ACTUATOR, ELECTRO-MECHANICAL, LINEAR. TYPE: LIFTING CYLINDER. MATERIAL: STEEL. ACTUATION METHOD: ELECTRIC MOTOR. END ITEM IDENTIFICATION: 3.59 AND 3.69 TRAVELING FEEDER SHUTTER. POTENTIAL: 460 V AC. CURRENT: 4 A. LENGTH: 0-500 MM. MOUNTING FACILITY: TRUNNION. ELECTRICAL RATING: 460 V AC, 3-PHASE, 1.8 KW, 60 HZ, 1700 RPM, IP55. SPEED: 114 MM/S. FORCE: 500 DAN PUSH/PULL. ACTUATOR […]

PN: RF17DRN71M4/BE05HR/TF/AK8H/V 3 PHASE GEAR MOTOR 4-POLE EUBA

ELECTRONIC ACTUATOR; SPEED: 6 MM/SEC; POWER: 0.37 KW; ELECTRICAL VOLTAGE: 440 V; FREQUENCY: 60 HZ; WITH TRAPEZOIDAL THREADED SPINDLE TYPE A4 TORQUE 5.0KN, STROKE 0-200MM, TRUNNION FIXING TYPE WITH FIXING SCREWS, WITH BRAKE AND AK8H ENCODER; MANUFACTURER 1: EUBA; PART-N 1: E/X-A4-011/C

MOTOR-REDUCER / , INPUT RPM: 1700 RPM / , REDUCTION RATIO: 1:21,25 / , OUTPUT RPM: 80 RPM / / SPEED REDUCTION RATIO: 1:21,25 , CONSTRUCTION MODE: FLANGED / / SERVICE FACTOR: 1.15 , SERVICE FACTOR: 1.15 / TORQUE: 14.3 NM , TORQUE: 14.3 NM / RATIO OF TORQUE: 14.3 NM , MOUNTING: FLANGE /

ELECTROMECHANIC ACTUATOR WITH TRAPEZOIDAL THREADED SPINDLE TYPE A4 DRIVE F:500 DAN, PRESSURE F:500 DAN F:500 DAN, TRAVEL 0-200MM SPEED 6 MM/S FIXING TYPE ROTATING MIND. EUBA E/X-A4-011

THRUST RING; FOR ELECTRIC ACTUATOR EUBA; TYPE D4; TORQUE 16.000 DAN; REFERENCE DRAWING TKCSA CHP_01_Y90_MDG_S03_0022_001, REVISION A; EXCLUSIVE MANUFACTURER: EUBA ANTRIEBSTECHNIK ELLER GMBH – POS.16

SEAL RING; O-RING TYPE; NITRILE RUBBER; HARDNESS 70 SHORE A; INNER DIAMETER 24,00 MM; INNER DIAMETER 34,00 MM; INNER DIAMETER 5,00MM; OUTER DIAMETER 24,00 MM; OUTER DIAMETER 34,00 MM; OUTER DIAMETER 5,00 MM; SECTION HEIGHT 24,00 MM; SECTION HEIGHT 34,00 M