GLEEBLE

NAME: STRESS RELIEF BASE ; MODIFIER NAME: FLOW STRESS BASE PLATE ;# ADDITIONAL DATA: BASE PLATE COOLED ; FEATURES ADDITIONAL S#: STAINLESS STEEL ; APPLICATION: GLEEBLE 3800 SIMULATOR ;# SEQUENCE: ON MCU HYDRAWEDGE II STRESS RELIEF TESTS ; COMMERCIAL REFERENCE#: GLEEBLE DSI 9555-301

NAME: STRIP ANNEALING GUIDES; MODIFIER NAME: TABLE SIDE PROTECTION; # ADDITIONAL DATA: L-SHAPED PROFILE 12 X 25 X 40 MM; ADDITIONAL CHARACTERISTICS: STAINLESS STEEL 0.5 MM THICK; APPLICATION: STEEL ANNEALING TESTS; SEQUENCE: IN LACASF’S GLEEBLE 3800; COMMERCIAL REFERENCE: # DSI GLEEBLE 34388; NOTE: WITH OBLONG FIXING HOLES; SPECIAL CONDITION(S): ALWAYS ORDER IN PAIRS

FIXING PIN ; CONSTRUCTION: CYLINDRICAL ; MATERIAL: STAINLESS STEEL ; MATERIAL GRADE: AISI 316L ; SURFACE TREATMENT: POLISHED ; DIAMETER: 4.76MM#; TOTAL LENGTH: 15.88MM ; END(S): ROUNDED ;#ADDITIONAL FEATURES: DOWELL PIN CLEEBLE 3800 LACASF FOR FIXING CP#STRIP ANNEALING WITHOUT TREATMENT/COATING ; COMMERCIAL REFERENCE: DSI#GLEEBLE HZ014 ; NOTE: DIMENSIONS MUST BE LEGATED = 3/16” X 5/8”

NAME: 5MM FLAT ALIGNER ; ADDITIONAL DATA: STAINLESS STEEL 25 X 25MM #REDUCES ; APPLICATION: ALIGNMENT 5MM ANVILS ; SEQUENCE: MCU #HYDRAWEDGE II ; COMMERCIAL REFERENCE: GLEEBLE DSI GN2885K

NAME: ANVIL W ; MODIFIER NAME: SMALL PLANE STRAIN ANVIL ; ADDITIONAL DATA: PURE TUNGSTEN 5 X 25 X 20 MM ; CHARACTERISTICS # ADDITIONAL FEATURES: PURE TUNGSTEN ; APPLICATION: PLANE STRAIN TESTING ;COMMERCIAL REFERENCE: DSI GLEEBLE 9105-256 ; NOTE: PER UNIT, BUY# THE PAIR

CONNECTION PLUG ; MATERIAL: STAINLESS STEEL ; NOMINAL DIAMETER: 1-5/8-12 IN ;# STANDARD: AISI 316 ; COMMERCIAL REFERENCE: DSI GLEEBLE 9510-414 ; NOTE:# HEXAGONAL HEAD WITH SEALING RING WATER STOP BOSS PLUGF

NAME: ANVIL W ISO-T ; MODIFIER NAME: ISO-T UNIAXIAL COMP ANVILL CAP# ; ADDITIONAL DATA: TUNGSTEN ANVIL TIP ; ADDITIONAL# CHARACTERISTICS: ESP 6.4MM AND DIAM 19.1MM ; APPLICATION: STRESS RELIEF TESTING ; COMMERCIAL REFERENCE: DSI GLEEBLE 9219-066 ; NOTE: PER UNIT,# BUY THE PAIR