WG-195777, JW-567-5550
RETAINING M1, ID 490,00MM, OD 540,00 MM, DP 22,00 MM, COMERCIAL REFERENCE: JAMES WALKER WG-195777, JW-567-5550 DRAWING 613001037
WG-195777, JW-567-5550 Read More »
JAMES WALKER
SOLOSELE TYPE G 1500X1520X12.5MM
JAMES WALKER SEAL G1500X1520X12.5MM SPECIFIC PART; NOMENCLATURE: SEAL; MATERIAL: NITRILE RUBBER; FINISH: NO FINISH; APPLICATION: LAMINATOR; MANUFACTURER: JAMES WALKER; REFERENCE: SOLOSELE TYPE G 1500X1520X12.5MM; SOLOSELE G SEAL 1500X1520X12.5MM; MATERIAL NITRILE RUBBER COTTON NM59-74/80 AND GHN/FC; FINISHING NO FINISH; CODEJAMESWALKER SOLOSELE TYPE G NITRILE AND NITRILE/COTTON NM59-74/80 AND GHN/FC Ø1500XØ1520X12MM; APPLICATION: HAGC THICK PLATES
SOLOSELE TYPE G 1500X1520X12.5MM Read More »
WALKERSELE M1/D6 610-560 X 22
ROTARY SHAFT SEAL; SHAFT DIAMETER: 560 MM; BEARING DIAMETER: 610 MM; THICKNESS: 22 MM; CLOSED RETAINER WITH SLOTS AND GASKET ALM ENDS; PLANO REFERENCE 5691-12-0959 POS.31; BRAND 1: JAMES WALKER ; N-PART 1: WALKERSELE M1/D6 610-560 X 22 ; BRAND 2 : RETENSUR
WALKERSELE M1/D6 610-560 X 22 Read More »
WB2-26334
SEAL, OIL; INSIDE DIAMETER: 750 MM, OUTSIDE DIAMETER: 814 MM, WIDTH: 28.4 MM, MATERIAL: NBR, TYPE: OIL; FFT: FOR SHAFT, M1/D6 ENDLESS; DESIGNATION JW 567-5726/WG-208259; FOR VERTICAL EDGER ROLL CHOCKS; MNFR: JAMES WALKER & CO LTD, REFERENCE: WB2-26334, MNFR: VAI; DRAWING: HAF.WB1 .22212-M1000/ZSZ-000 567-6195, POS: POS 1521
JW-153 773-R
SEAL, OIL: TYPE DOUBLE LIP, INSIDE DIAMETER 150 MM, OUTSIDE DIAMETER 166 MM, WIDTH 17 MM, FFT: WITH TENSIONING BAND; WAX ”S”COMPOUND; FOR ”8”MODULES;, MNFR: SMS-MEER GMBH MNFR PART NO: UNK, MNFR: JAMES WALKER & CO LTD MNFR PART NO: JW-153 773-R, DRAWING: 1/7403870/02 REV: UNK, INSPECTION REQUIREMENT: TEST CERTIFICATE REQUIRED, MANDATORY SUPPLY FROM S.M.S.
WALKERSELEM1-D6-56-1050
GASKET FITTING (STATIC); TYPE: SEMIMETALLIC (SPIRAL); INSIDE DIAMETER: 266.7 MM; OUTSIDE DIAMETER: 311.15 MM; SPEOR: 19.05 MM; FLUIDS: GREASE; WITH OUTER SLIT AND GEAR HOLES; SIZE: 5691-12-0977. OTHER APPROVED MARKS: C HESTERTON; MAKE: JAMES WALKER; N-PART: WALKERSELEM1-D6-56-1050
WALKERSELEM1-D6-56-1050 Read More »
JW-57-260
ROTARY SHAFT SEAL; TYPE: CLOSED; SHAFT DIAMETER: 260 MM; HOUSING DIAMETER: 304 MM; THICKNESS: 20 MM; CLOSED SEAL DIAM. 260/304 X 20 DRAWING 806293-12; POSITION 12 DRAWING 5691-12-0978; MANUFACTURER 1: JAMES WALKER; PART NUMBER 1: JW-57-260; MANUFACTURER 2: RETENSUR
