CAMERA:
TYPE INDUSTRIAL COLOUR,
FFT: TYPE: FK-6124-01-C-SD; HIGH END INDUSTRIAL
COLOUR CAMERA: 1/3 IN CCD-SENSOR; MICROLENS MATRIX
SENSOR; SUPER-D-II-INTERLINE TRANSFER OF SECOND
GENERATION DIGITAL SIGNAL PROCESSING; SELECTABLE
DYNAMIC RANGE: 160 TIMES; SCANNING AREA: 4.9 X 3.7
MM; PICTURE ELEMENTS: 753 (H) X 582 (V);
SENSITIVITY: 0.4 LUC F1:0.75 (AGC ON); RESOLUTION:
7490 LINES (H); SCANNING: 2:1 625 LINES;
SIGNAL/NOISE RATIO: >50 DE AGC OFF; AUTOMATIC LIGHT
CONTROL: 1:52.000; ELC: 1:10.000; ELECTRONIC
SHUTTER: 1/50BIS 1/10.000; BACK LIGHT COMPENSATION; SELECTABLE SUPER DYNAMIC II: ON/OFF; SELECTABLE BY
SET UP-MENU; CAMERA TITLE: 16 CHARACTERS;
INTEGRATION MODE: AUTOMATICALLY OR IN 6 STEPS; GAIN
CONTROL: AGC OR MANUAL:14 DB RANGE; MOTION
DETECTOR: ON /OFF; INTERFACE: RS485; INTEGRATED
POWER CONSUMPTION: 24 VAC/ 12VDC; USED FOR CCTV
SERVICING: FPF-HDLE, MNFR: PIEPER GMBH MNFR PART
NO: FK-CM-6148-2-IQ-R3
The impact of the 4D printer on the international market
The most obvious advantage of 4D printing is that objects larger than printers can be printed as just one part. Because they can shrink and unfold, items that are too large to fit in a printer can be compressed and then become full size.
