SALISBURY

SLOTTED SCREWDRIVERS:1/8 X 2”, 3/16 X 4”, 1/4 X 6”

TOOL BOX; 30 PCS LUXURY MAINTENANCE TOOL SET. INCLUDES: 1/8 X 2", 3/16 X 4", 1/4 PHILLIPS SCREWDRIVERS #1 X 3", #2 X 4" 30 – 150 IN/LB TORQUE CLAMP; REVERSIBLE RATCHET DRIVE 3/8" AND EXTENSIONS 3 AND 6" DRIVE 3/8" DEEP DRIVE ENTRY SET 3/8" AT 13/16" 12 POINTS 8 PCS; BOX END CLAMP

PROTECTIVE GLOVE; APPLICATION: FOR LOW VOLTAGE HANDLING; MATERIAL: NATURAL RUBBER TYPE 1; SIZE/MEASUREMENT: 10; CLASS 00 DIELECTRIC GLOVE SUITABLE FOR WORK UP TO 500 VAC ACCORDING TO ASTM D120 AND IEC EN60903. – FOR ARGENTINA, THE ”S” STAMP IS REQUIRED. OF THE UNDERSECRETARY OF TRADE AND CONSUMER DEFENSE; MANUFACTURER 1: SALISBURY; N-PART 1: E0014R10

PROTECTIVE GLOVE; APPLICATION: MECHANICAL PROTECTION OF DIELECTRIC GLOVE; MATERIAL: INDURA ULTRA SOFT/NOMEX; SIZE/MEASUREMENT: 11; ARC FL ASH CAT II GLOVE FOR ELECTRICAL USE; ARC FLASH PROTECTION CATEGORY HRC II (8 CAL /CM2) ACCORDING TO NFPA 70E. – FOR ARGENTINA, THE ”S” STAMP IS REQUIRED. OF THE SUBSE CRETARY OF COMMERCE AND CONSUMER DEFENSE; MANUFACTURER 1:

PROTECTIVE GLOVE; APPLICATION: ELECTRICAL WORK UP TO 7500V; MATER IAL: INSULATING RUBBER UP TO 7500 VAC; SIZE/MEASUREMENT: 10; COMPLIES WITH THE IEC 60903 STANDARD. FOR ARGENTINA IT MUST HAVE THE ”S” STAMP.; MANUFACTURER 1: SALISBURY; N-PART 1: E114YB10 + GB114

PROTECTIVE GLOVE; APPLICATION: ELECTRICAL WORK UP TO 17000 V; MATERIAL: INSULATING RUBBER UP TO 17000 VAC; SIZE: 8; COMPLIES WITH THE IEC 60903 STANDARD. FOR ARGENTINA IT MUST HAVE THE ‘S’ STAMP.; BRAND 1: SALISBURY; N-PART 1: E216RB8 + GB116

PROTECTIVE GLOVE; APPLICATION: AGAINST ARC FLASH; SIZE/MEASUREMENT: ONE SIZE; CLASSIFICATION 40 CAL/CM2, GRAY COLOR. THESE GLOVES ARE DOUBLE SEWN WITH NOMEX THREAD, HAVE A 9 OZ./YD2 (30 5 G/M²) SEF (SELF EXTINGUISHING FIBER™) MODACRYLIC COATING, 1 LAYER OF 13 OZ./YD2 (441 G/M2) AND 1 5.5 OZ./YD2 LAYER (186 G/M2) OUTER LAYER 88% COTTON / 12%"