SEAL, OIL: TYPE SINGLE LIP, SPRING LOADED, OPEN CASE, INSIDE DIAMETER95 MM, OUTSIDE DIAMETER 120 MM, WIDTH 13 MM, MATERIAL NBR/STEEL,STANDARD DIN 3760, FFT: FOR ROTATING SHAFT; SHORE HARDNESS A 78.0000,MNFR: SIMRIT MNFR PART NO: 95-120-13BA 72NBR902, MNFR: MERKELFREUDENBERG FLUIDTECHNIC MNFR PART NO: 0145-144.922 MA, DRAWING:10.0013.3.133/75.212 REV: 0
95-120-13BA 72NBR902 Read More »
SEAL, OIL: TYPE SINGLE LIP, SPRING LOADED, CLOSED CASE, INSIDEDIAMETER 130 MM, OUTSIDE DIAMETER 160 MM, WIDTH 12 MM, MATERIALNBR/STEEL, STANDARD DIN 3760, FFT: FOR ROTATING SHAFT; SHORE HARDNESSA 72.0000; REFERENCE DATA STANDARD DIN 7184, MNFR: SIMRIT MNFR PARTNO: 130-160-12 B2 72NBR/902, MNFR: ERNST KOCH MNFR PART NO: UNKNOWN,MNFR: ALAA INDUSTRIAL EQUIPMENT FACTORY MNFR PART
130-160-12 B2 72NBR/902 Read More »
SEAL, OIL: TYPE SINGLE LIP, SPRING LOADED, OPEN CASE, INSIDE DIAMETER160 MM, OUTSIDE DIAMETER 190 MM, WIDTH 15 MM, MATERIAL NBR/STEEL,STANDARD DIN 3760, FFT: FOR ROTATING SHAFT; SHORE HARDNESS A 72.0000;REFERENCE DATA STANDARD DIN 7184, MNFR: SIMRIT MNFR PART NO:160-190-15 BA 72NBR/902, MNFR: MERKEL FREUDENBERG FLUIDTECHNIC MNFRPART NO: 0145-138.112 MA, MNFR: ERIKS GROUP NV MNFR
160-190-15 BA 72NBR/902 Read More »
TAND0^ LOAD CELL ULTRA BUSH MANUFACTURER PART NO: ULTRA BUSH 0118093 MANUFACTURER: SIMRIT DRAWING NO: ERD-CBA-14.72.40-8703/DLZ-000
ULTRA BUSH 0118093 Read More »
SEAL, OIL: TYPE SINGLE LIP, SPRING LOADED, CLOSED CASE, INSIDEDIAMETER 105 MM, OUTSIDE DIAMETER 130 MM, WIDTH 13 MM, MATERIALNBR/STEEL, STANDARD DIN 3760, FFT: FOR ROTATING SHAFT; SHORE HARDNESSA 72.0000; REFERENCE DATA STANDARD STANDARD DIN 7184, MNFR: SIMRIT MNFR PART NO: 105-130-13 B2D 72NBR/902, MNFR: KACO GMBH + CO. KG MNFRPART NO: DFK105.130.13, MNFR: ERIKS
105-130-13 B2D 72NBR/902 Read More »
RING; TYPE: GUIDE, KB, MATERIAL: HGW HG517, SIZE: 100 X 95 X 9.7 MM,APPLICATION: CYLINDER; FFT: CYLINDER INNER DIAMETER (D ):100 MM, RINGINSIDE DIAMETER (DF):95 MM, RING WIDTH(H):9.6 MM, HOUSING HEIGHT(L):9.7 MM, BENDING BLOCKS, HSM – HOT SKIN PASS MILL, SMS DEMAG PARTNUMBER:G56627; P/N: 24130954, OEM: SIMRIT; DRAWING:90A.WC42.24421A32-M1016, DRAWING: SMS 20668992
RING: TYPE OMK-MR, DOUBLE ACTING SEAL, APPLICATION BENDING BLOCKSPISTON, SIZE 100 X 84.5 X 6.3 MM, MATERIAL PTFE B602 / NITRILE RUBBERNBR, FFT: FROFILE RING WITH AN O-RING, CYLINDER INNERDIAMETER(D):100MM, HOUSING LENGTH(L):6.30MM, HOUSING INSIDEDIAMETER:84.5 MM, BENDING BLOCKS, HSM – HOT SKIN PASS MILL, SMS DEMAGPART NUMBER:G56626, OEM: SIMRIT OEM PART NO: 24178475, DRAWING:90A.WC42.24421A32-M1015 REV: 0,
